InteliSENS LN Series Lump & Neck Detector PROTON Vietnam
Hãng sản xuất: Proton
Mr. Tuan
hongthanh86InteliSENS LN Series Lump & Neck Detector Gauge PROTON Vietnam, InteliSENS LN Series Lump & Neck Detector GaugePROTON , InteliSENS LN Series Lump & Neck Detector Gauge PROTON Viet nam
PROTON , PROTON Vietnam , PROTON Viet nam
Features
- Provides very high-speed, non-contact optical detection of insulation lump and neck flaws for cables up to 25mm in diameter.
- Available in a 2-axis model for budget applications and a 3-axis model for maximum flaw coverage.
- Housed in rugged enclosures to survive harsh industrial environments.
- Fitted with an integrated airwipe system that maintains optical window cleanliness.
- Completely solid-state design with no moving parts for long life and high reliablity.
- Available with industry-standard communications interfaces fitted either as standard or as an option.
LUMP & NECK DETECTION
InteliSENS® LN Series Lump & Neck Detector
Features
- Provides very high-speed, non-contact optical detection of insulation lump and neck flaws for cables up to 25mm in diameter.
- Available in a 2-axis model for budget applications and a 3-axis model for maximum flaw coverage.
- Housed in rugged enclosures to survive harsh industrial environments.
- Fitted with an integrated airwipe system that maintains optical window cleanliness.
- Completely solid-state design with no moving parts for long life and high reliablity.
- Available with industry-standard communications interfaces fitted either as standard or as an option.
Additional Information:
Series Brochure
Download PDF >
Dimensional drawings
LN2030 & AiG2-LN >
LN3030 >
Pre-sales enquiry click here >
Manual request click here >
Support request click here >
Introduction
Proton Products InteliSENS® LN series 2-axis and 3-axis lump and neck detectors provide outstanding product quality supervision.
The InteliSENS® LN Series uses LED light sources, high-speed digital signal processing (DSP) and specialized optical design technology to inspect, alarm and report Surface Quality Defects (SQD) as they happen, reducing customer complaints and improving your reputation as a quality product supplier.
The LED Constant Light Sources illuminate the circumference of the product and any change in the surface profile is immediately detected by a photodiode optical receiver which reports the height, length and location of lump and neck flaws along and around the product.
Extremely easy to install, integrate and operate, InteliSENS® LN series lump and neck detectors may be used as a standalone device or integrated with production line PLCs.
Optional audio/visual alarm units, fault ticket printers and data logging PC software are available to compliment any InteliSENS® LN series model to close the loop on Quality Control.
Applications include production processes such as wire drawing, braiding, cable insulation and jacketing, rewinding and coiling, rubber and plastic extrusion processes for hose, tube and pipe production.
Operating principle
Proton Products InteliSENS® LN series lump and neck detectors use LED light sources to illuminate the circumference of the cable under inspection. Light that is not obscured by the cable is focused onto a high-speed photo-detector. A custom FPGA-processor detects and logs any sudden changes in the detected light caused by lump or neck flaws in the cable insulation. This signal processing is performed 100,000 times a second to ensure that even the smallest flaws are detected at the highest line speeds.
|
Specification
|
Min
|
Typ
|
Max
|
Units
|
|---|---|---|---|---|
| Optical gate width | 30 | mm | ||
| Object diameter | 0.4 | 25 | mm | |
| Fault height | 0.04 + 1% of object Ø | mm | ||
| Fault length (line speed dependent) | 0.5 | mm | ||
| Tolerance set range | 0.04 | 10 | mm | |
| Tolerance set resolution | 0.001 | mm | ||
| Line speed (fault length dependent) | 2500 | m/min | ||
| Minimum time between faults (user configurable) | 1 | 9999 | ms | |
| Signal processing rate | 200 | kHz/axis | ||
| Power supply voltage | 15 | 24 | 32 | VDC |
| Power consumption (with optional AiG2-LN display) | 20 | W | ||
| Length | 320 | mm | ||
| Width | 50 | mm | ||
| Height | 292 | mm | ||
| Weight | 3 | kg | ||
| Operating temperature | 5 | 45 | °C | |
| Environmental protection | IP67 | - |
| Light source | LED | ||
| Air wipe | Integrated with 6mm push-fit air line fitting | ||
| Measurement units (user configurable) | Flaw height | millimetres | inches |
| Line speed | metres/minute | feet/min | |
| Length | metres | feet | |
Standard Interfaces
| 2x digital inputs | User configurable function | Length reset | End of reel/Print activation | ||
| Maximum input voltage | 24Vdc | ||||
| 3x isolated contact relay outputs | User configurable function | Gauge OK | Lump | Neck | Flaw count exceeded |
| Maximum voltage | 50VDC or 30VAC | ||||
| Maximum current | 0.5A | ||||
| 2x line speed pulse inputs | Maximum frequency | 250kHz (user scalable) | |||
| Maximum input voltage | 30V or 50V pulses (two separate inputs) | ||||
| Communications interfaces | RS-232* | RS-422 / RS-485 | CAN-bus** | Ethernet TCP/IP | |
*An optional RS-232-to-USB converter cable is available for connection to USB equipped computers.
**CAN-bus protocol is proprietary and reserved for connection to other Proton Products equipment such as a Proton AiG2-LN interface display unit or Proton NEXiS CS Series controller.
Optional Interfaces
Must be specified for installation at time of manufacture, cannot be retrofitted.
| 4x Analogue outputs | X, Y, Z axis voltage output; user scalable to ±10Vdc |
| Analogue input (user configurable) | Line speed or flaw height setting; user scalable to 0~10Vdc |
| Wireless | Bluetooth (not available in units destined for European markets) |
| Communications | Choice of any one of: PROFIBUS; EtherNet/IP or DeviceNET |
|
Specification
|
LN2030
|
LN3030
|
Units
|
|---|---|---|---|
| Number of axes | 2 | 3 | axes |
